Navigate: Home | Find your bike | TRE |FCE| Contact | Other ProductsNews
 


2001 & up Bandit 1200 Carb Kit
Part # B12-0102...$130.00  For off road use only

1997 thru 2000 Bandit 1200 Carb Kit
Part # B12-9700...$130.00 For off road use only

This kit is the result of 5 months of combined testing. It is designed for use with either the stock header with ANY slip-on or any aftermarket exhaust system.

The needles included in this kit have 5 angles ground on them. After 5 months of development, these were the final design chosen.

This is due to the fact that performance decreased when any change was made to them.

This kit can be used with either a stock or modified airbox, modification instructions are included with the kit along with the appropriate jets

This bike was tested with numerous airbox modifications, and ignition advancers.

The float bowl screws on this bike are often damaged when removed, we have included a complete set of stainless steel allen screws with the kit.

This kit will provide equal full throttle performance to any pod filter kit, with more torque below 5000 rpm, with quieter, smoother driveability.

This kit will give you clean cruising AND max power on the same needle setting.

With this kit you will have it all !!

 

NOTE:
Ignition advancers are not recommended - see our advancer test

View Dyno ChartsView Kit Photos

 
 k i t  p h o t o s
    d y n o  c h a r t s
 



 


 

Navigate: Home | Find your bike | TRE |FCE| Contact | Other ProductsNews